Eurobalise-Train communication modelling to assess interferences in railway control signalling systems

The evolution of the railway sector depends, to a great extent, on the deployment of advanced railway signalling systems. These signalling systems are based on communication architectures that must cope with complex electromagnetical environments. This paper is outlined in the context of developing the necessary tools to allow the quick deployment of these signalling systems by contributing to an easier analysis of their behaviour under the effect of electromagnetical interferences. Specifically, this paper presents the modelling of the Eurobalise-train communication flow in a general purpose simulation tool. It is critical to guarantee this communication link since any lack of communication may lead to a stop of the train and availability problems. In order to model precisely this communication link we used real measurements done in a laboratory equipped with elements defined in the suitable subsets. Through the simulation study carried out, we obtained performance indicators of the physical layer such as the received power, SNR and BER. The modelling presented in this paper is a required step to be able to provide quality of service indicators related to perturbed scenarios.

A Multi Bearer Adaptable Communication Demonstrator for Train-to-Ground IP Communication to Increase Resilience

Preprint version

On the study of train-track dynamic interactions caused by rail welds on discrete supported rails

The paper studies the influence of rail weld dip on wheel-rail contact dynamics, with particular reference to freight trains where it is important to increase the operating speed and also the load transported. This has produced a very precise model, albeit simple and cost-effective, which has enabled train-track dynamic interactions over rail welds to be studied to make it possible to quantify the influence on dynamic forces and displacements of the welding geometry; of the position of the weld relative to the sleeper; of the vehicle's speed; and of the axle load and wheelset unsprung mass. It is a vertical model on the spatial domain and is drawn up in a simple fashion from vertical track receptances. For the type of track and vehicle used, the results obtained enable the quantification of increases in wheel-rail contact forces due to the new speed and load conditions.

An Open and Social Spaced Repetition System for Language Learning

In the last decades big improvements have been done in the field of computer aided learning, based on improvements done in computer science and computer systems. Although the field has been always a bit lagged, without using the latest solutions, it has constantly gone forward taking profit of the innovations as they show up. As long as the train of the computer science does not stop (and it won’t at least in the near future) the systems that take profit of those improvements will not either, because we humans will always need to study; Sometimes for pleasure and some other many times out of need. Not all the attempts in the field of computer aided learning have been in the same direction. Most of them address one or some few of the problems that show while studying and don’t take into account solutions proposed for some other problems. The reasons for this can be varied. Sometimes the solutions simply are not compatible. Some other times, because the project is an investigation it’s interesting to isolate the problem. And, in commercial products, licenses and patents often prevent the new projects to use previous work. The world moved forward and this is an attempt to use some of the options offered by technology, mixing some old ideas with new ones.

Dialog Systems based on Markov decision processes over two real tasks

In this work the state of the art of the automatic dialogue strategy management using Markov decision processes (MDP) with reinforcement learning (RL) is described. Partially observable Markov decision processes (POMDP) are also described. To test the validity of these methods, two spoken dialogue systems have been developed. The first one is a spoken dialogue system for weather forecast providing, and the second one is a more complex system for train information. With the first system, comparisons between a rule-based system and an automatically trained system have been done, using a real corpus to train the automatic strategy. In the second system, the scalability of these methods when used in larger systems has been tested.

The cross layer RMPA handover: a reliable mobility pattern aware handover strategy for broadband wireless communication in a high-speed railway domain

Enhancing the handover process in broadband wireless communication deployment has traditionally motivated many research initiatives. In a high-speed railway domain, the challenge is even greater. Owing to the long distances covered, the mobile node gets involved in a compulsory sequence of handover processes. Consequently, poor performance during the execution of these handover processes significantly degrades the global end-to-end performance. This article proposes a new handover strategy for the railway domain: the RMPA handover, a Reliable Mobility Pattern Aware IEEE 802.16 handover strategy "customized" for a high-speed mobility scenario. The stringent high mobility feature is balanced with three other positive features in a high-speed context: mobility pattern awareness, different sources for location discovery techniques, and a previously known traffic data profile. To the best of the authors' knowledge, there is no IEEE 802.16 handover scheme that simultaneously covers the optimization of the handover process itself and the efficient timing of the handover process. Our strategy covers both areas of research while providing a cost-effective and standards-based solution. To schedule the handover process efficiently, the RMPA strategy makes use of a context aware handover policy; that is, a handover policy based on the mobile node mobility pattern, the time required to perform the handover, the neighboring network conditions, the data traffic profile, the received power signal, and current location and speed information of the train. Our proposal merges all these variables in a cross layer interaction in the handover policy engine. It also enhances the handover process itself by establishing the values for the set of handover configuration parameters and mechanisms of the handover process. RMPA is a cost-effective strategy because compatibility with standards-based equipment is guaranteed. The major contributions of the RMPA handover are in areas that have been left open to the handover designer's discretion. Our simulation analysis validates the RMPA handover decision rules and design choices. Our results supporting a high-demand video application in the uplink stream show a significant improvement in the end-to-end quality of service parameters, including end-to-end delay (22%) and jitter (80%), when compared with a policy based on signal-to-noise-ratio information.

Analytical efficiency evaluation of a network mobility management protocol for Intelligent Transportation Systems

One of the major concerns in an Intelligent Transportation System (ITS) scenario, such as that which may be found on a long-distance train service, is the provision of efficient communication services, satisfying users' expectations, and fulfilling even highly demanding application requirements, such as safety-oriented services. In an ITS scenario, it is common to have a significant amount of onboard devices that comprise a cluster of nodes (a mobile network) that demand connectivity to the outside networks. This demand has to be satisfied without service disruption. Consequently, the mobility of the mobile network has to be managed. Due to the nature of mobile networks, efficient and lightweight protocols are desired in the ITS context to ensure adequate service performance. However, the security is also a key factor in this scenario. Since the management of the mobility is essential for providing communications, the protocol for managing this mobility has to be protected. Furthermore, there are safety-oriented services in this scenario, so user application data should also be protected. Nevertheless, providing security is expensive in terms of efficiency. Based on this considerations, we have developed a solution for managing the network mobility for ITS scenarios: the NeMHIP protocol. This approach provides a secure management of network mobility in an efficient manner. In this article, we present this protocol and the strategy developed to maintain its security and efficiency in satisfactory levels. We also present the developed analytical models to analyze quantitatively the efficiency of the protocol. More specifically, we have developed models for assessing it in terms of signaling cost, which demonstrates that NeMHIP generates up to 73.47% less signaling compared to other relevant approaches. Therefore, the results obtained demonstrate that NeMHIP is the most efficient and secure solution for providing communications in mobile network scenarios such as in an ITS context.

Polilaktida oinarri duten inplante polimeriko biodegradagarrien diseinu, fabrikazio eta propietateak

[EU]3D inprimaketa gaur egun, biomedikuntzaren garapenerako aukera ezberdinak ematen dituen teknologia iraultzaile gisa aurkezten da; bai medikuntza arloan formazio eta ikerkuntzarako erreminta gisa, baita dispositibo berrien diseinu eta fabrikaziorako. Bere abantailarik aipagarriena prototipaketa azkarra da. Gainera, teknologia honek barne egitura eta forma ezberdineko objektuak fabrikatzea ahalbidetzen du koste lehiakor batean. Lan honen helburua 3D inprimagailuen bidezko prototipoen fabrikazioan zentratzen da, horretarako lehengai bezala polimero biodegradagarri eta biobateragarria erabiliz. Horrez gain, metodo tradizionalarekin konparatuz teknologia honek izan ditzakeen abantailak ere aztertu nahi dira, ez bakarrik alde ekonomikoari edo denborari begira, baita fabrikatutako objektuen propietateei begira ere. Dena dela, horrekin hasi aurretik ezaugarritze fisiko eta termikoa burutu beharko zaie lehengaiei, 3D inprimagailuaren parametroen aukeraketa egokia egiteko eta parametro horien eta amaierako produktuaren kalitate, egitura eta propietateen artean erlazio egokia ezartzeko. Lan hau aurrera eramateko poli(L-laktida)-rekin (PLLA) egingo da lan, bai ehun ingeniaritzan baita hezurren apurketen finkapenerako dispositiboetan oso erabilia izan den polimeroa.

Modelización acústica del interior de un Tren de Alta Velocidad

[ES]El presente Trabajo de Fin de Grado, titulado ‘Modelización Acústica del Interior de un Tren de Alta Velocidad’, tiene como objetivo el análisis acústico a bajas frecuencias del habitáculo de un coche de un tren de alta velocidad. La temática ha sido elegida debido a la creciente presencia de trenes de alta velocidad en nuestro entorno, en los cuales el Control Acústico o de Ruidos es un aspecto muy importante para el confort del medio de transporte. Dentro de los ruidos por los que se ve afectado el tren, los de baja frecuencia son los más difíciles de tratar y controlar, y es por ello que van a constituir la línea de trabajo de este proyecto. La estructura de lo que se va a tratar en este proyecto es la siguiente: En primer lugar, se analizará el contexto en que se encuadra este proyecto y las razones que han llevado a su realización. Posteriormente, se explicarán los fundamentos teóricos que hay detrás de los análisis que se van a realizar. Más adelante se pasará al análisis del caso práctico que se ha elegido para ilustrar el proyecto: el habitáculo de un coche del tren Serie 120 de Renfe, construido por CAF [1, 2, 3]. Se realizarán tanto análisis modales como de respuesta forzada. Dicho ejemplo servirá de base para asentar las conclusiones y proponer la aplicación que se les puede dar a éstas, así como las líneas de investigación para las cuales este proyecto puede ser un punto de partida.

Modelización acústica del interior de un tren de alta velocidad.

[ES]El presente Trabajo de Fin de Grado titulado 'Modelización Acústica del Interior de un Tren de Alta Velocidad' tiene como tarea la realización de diversos análisis acústicos de un habitáculo de un coche ferroviario. El principal objetivo va a ser ofrecer una guía detallada a modo de manual de usuario para llevar a cabo dichos análisis sin necesitar información adicional. Las herramientas de ayuda a utilizar van a ser un programa CAD de diseño como Solid Edge ST6 o Catia V5 y un software de elementos finitos como Ansys.

Comparativa entre distintos sistemas comerciales de feedback de la profundidad y frecuencia de las compresiones torácicas durante la Reanimación Cardiopulmonar realizada en un tren de larga distancia.

[Es]En este trabajo se analiza la posibilidad de utilizar los sistemas de feedback comerciales más conocidos (TrueCPR de la empresa Physio-Control y CPRmeter de Laerdal) en un tren de larga distancia. Se trata de estudiar su habilidad y precisión tanto en profundidad de compresión como en frecuencia. Para nes comparativos, también ha sido necesario analizar la precisión de ambos equipos en condiciones de laboratorio.

Estudio de la precisión en el cálculo de la profundidad del pecho a partir de la eceleración durante la reanimación cardiopulmonar realizada en un tren en movimiento.

[Es]Las guías de resucitación recomiendan el uso de dispositivos de feedback para mejorar la calidad de las compresiones torácicas. Estos sistemas calculan la profundidad y frecuencia de las compresiones torácicas e informan al rescatador para que, si es necesario, éste corrija su maniobra para ajustarse a los valores recomendados por las guías. La mayoría de estos dispositivos integran la aceleración dos veces para estimar la profundidad de compresión. Sin embargo, cuando la reanimación cardiopulmonar se realiza en vehículos en movimiento, como por ejemplo un tren de larga distancia, los sistemas que utilizan la señal de aceleración pueden verse afectados por las aceleraciones generadas por el propio tren. En este trabajo se estudia la precisión en el cálculo de la profundidad del pecho, a partir de la señal de aceleración, cuando la reanimación cardiopulmonar es realizada en un tren en movimiento. Este análisis permitirá determinar si los sistemas de feedback basados en la aceleración son aptos para ser utilizados en un tren de larga distancia.

Modelling and Simulation of ERTMS for Current and Future Mobile Technologies

Nowadays, train control in-lab simulation tools play a crucial role in reducing extensive and expensive on-site railway testing activities. In this paper, we present our contribution in this arena by detailing the internals of our European Railway Train Management System in-lab demonstrator. This demonstrator is built over a general-purpose simulation framework, Riverbed Modeler, previously Opnet Modeler. Our framework models both ERTMS subsystems, the Automatic Train Protection application layer based on movement authority message exchange and the telecommunication subsystem based on GSM-R communication technology. We provide detailed information on our modelling strategy. We also validate our simulation framework with real trace data. To conclude, under current industry migration scenario from GSM-R legacy obsolescence to IP-based heterogeneous technologies, our simulation framework represents a singular tool to railway operators. As an example, we present the assessment of related performance indicators for a specific railway network using a candidate replacement technology, LTE, versus current legacy technology. To the best of our knowledge, there is no similar initiative able to measure the impact of the telecommunication subsystem in the railway network availability.

Implementación de sistema ETCS en entorno cliente-servidor.

[ES]La interoperabilidad entre distintas redes ferroviarias europeas es muy escasa. Para dar solución a este problema, la Unión Europea creó el sistema europeo de gestión del tráfico ferroviario (ERTMS), encargado de crear un estándar único para toda la red europea. El objetivo de este proyecto es la implementación del sistema ETCS ( European Train Control System ) en un entorno cliente-servidor. La implementación incluye el sistema del tren y el del centro de control (RBC). Se ha implementado de forma que se pueda operar sobre dos protocolos de red transporte, de forma que será compatible tanto para redes orientadas a la conexión (TCP) como no orientadas a conexión (UDP).